Eemax Accumix II AM004120T: 3.5 kW 120V 20 amp Electric Tankless Water Heater for hand-washing sinks
Feature Highlights
≈ ASSE-approved mixing valve prevents scalding output temperatures ≈ Mount it in any orientation ≈ Inlet and outlet water temperature sensors ≈ Precise water flow meter
AM004120T replaced the MB004120T model in 2018.
Leading Performance Features
• Advanced technology circuit board • Activates at 0.3 GPM • Energy consumption varies according to hot water demand = Lower costs • Microprocessor-controlled temperature water heating • Glass reinforced heating chambers in a unique flow path ensures optimum heat transfer and extended element life • Digital temperature display accuracy of 1°F. Factory pre-set maximum output temperature of 105°F. • Silent Operation (except for AM012240T model) • 99% energy efficient • Save water by heating water at the point of use • Eliminate costly mixing valves (most areas, check local codes) • Continuous hot water. No storage capacity to run out. • Eliminate long pipe runs by heating water at the point of use • Easy installation with one cold or hot water line. 3/8" ID (5/8" OD) compression fittings instead of costly sweat connections • No T&P relief valve needed (most areas, check local codes) • Small, compact design • Warranty for failure due to leaks of heater body or element assembly: 5 years on parts, 1 year labor
Ideal places of use (applications)
♦ Shopping malls stores ♦ Strip mall retail stores ♦ Schools, colleges, public buildings ♦ Offices, commercial and warehouse spaces ♦ Restaurants and food service locations ♦ Kitchen, bar and utility sinks ♦ Compatible with Sensor or metering faucets ♦ Gas Stations ♦ Any remote sink without hot water
Specifications
• Dimensions: 5.25" W x 13.75" H x 4" D • Field Replaceable Ni-Chrome cartridge insert • Weight: 6 lbs • ASSE 1070 approved integrated mixing valve to conform to UPC 407.3. E • Cover material: White ABS, UL rated 94 V-0 (UL listing number E86887) • Operating Pressure Range: 35 PSI to 150 PSI • Diagnostics including error display
Table of key specifications for all AccuMix II models
Model
Volts²
Power (kW)
Amps
Temperature Rise (°F) at given GPM
Recommended Wire Gauge (AWG, (75° C/CU)
Number of 0.5 GPM Aerators Included
0.3 GPM
0.5 GPM
1 GPM
1.5 GPM
AM004120T
120
3.5
29
80
48
24
16
10
1
AM005240T
240
4.8
20
¹
66
33
22
14
1
AM007240T
240
6.5
27
¹
¹
44
30
10
2
AM010240T
240
9.5
40
¹
¹
65
43
8
3
AM012240T
240
11.5
48
¹
¹
79
52
8
4
AM004277T
277
4.1
15
¹
56
28
19
14
1
AM008277T
277
8.0
29
¹
¹
55
36
10
2
AM010277T
277
10.0
36
¹
¹
68
46
8
3
¹ Output temperature is set at the factory to a maximum of 105°F. Your output temperature may be less depending on the incoming water temperature. ² 208V single phase can be applied to 240V units with 25% reduced temperature output. The rating plate and installation instructions are according to 240V voltage use. Check with local building code prior to derating.
Share
