AO Smith ATI-310U-N Indoor Nat.Gas / LP Ultra-Low NOx Tankless Heater


Weight: 44.00 lbs

Rush Order:

190,000 BTU tankless gas water heater for homes with up to 3 bathrooms.

The ATI-310U for indoor installation is A. O. Smith's most popular and versatile tankless model. It features a maximum flow rate of 8 GPM, providing enough hot water for three showers in warm climates, or up to two showers in colder climates at the same time.

New, Improved Features

• Heat-resistant copper heat exchanger tubing
• Thicker heat exchanger drum
• Includes a pump control port
• Easy-Link System for up to 4 units

Specification highlights

• Set up for natural gas from factory, but field convertible from NG to LP with included gas conversion kit
• 190,000 BTUs
• Maximum flow rate of 8.0 GPM
• Non-condensing technology
• Ultra-Low NOx emissions (natural gas only). Complies with SCAQMD Rule 1146.2 for NOx emissions requirement of 14 ng/J or 20 ppm
• Complies with lead-free standards
• Built-in freeze protection
• Indoor models include factory-installed 120V power cord with plug
• Manual reset high limit (Set at 194°F)
• Overheat cutoff fuse
• Inlet and outlet thermistors for constant temperature monitoring
• Can be used for radiant/hydronic/space heating as well as the usual running hot water (domestic hot water/DHW). See page 36 of the installation manual (download below).

Optional Accessories

Horizontal, through-wall or vertical stainless steel venting kit
• Recess Box (for outdoor models)
• Pipe Cover
Isolation Valve Kit
• Backflow Preventer
• Concentric Termination Kits



Emission Ultra-Low NOx
Maximum BTUs 190,000
Minimum BTUs
Limited Heat Exchanger Warranty 15 Years for residential installation
5 Years for commercial installation
Limited Parts Warranty 5 Years
Water and Gas Connection Location Bottom
Water and Gas Connection Size 3/4" male NPT
Heat Exchanger HRS35 Copper Alloy
Secondary Heat Exchanger Stainless Steel
Electrical power 120V 60 Hz
Uniform Energy Factor (UEF) 0.82
ENERGY STAR qualified Yes
NSF Certification NSF/ANSI Standard 5
CSA Certification Yes
CEC Compliant Yes
Technology Non-Condensing
Fresh air intake vent diameter 3"
Exhaust vent diameter, material 4", Category III Stainless Steel
Venting length

60’ Max Length, 6 Elbows max
(90° elbows = 5’ equivalent length)

Venting direction

Horizontal or vertical

Minimum water heating flow rate

0.5 GPM initially, 0.4 GPM thereafter

Type Space Saving
Height 20.5"
Width 13.75"
Depth 9.5" for outdoor model
10.0" for indoor model
Product Weight 39lbs/17.7kg
Shipping Weight 44lbs


Ultra-Low NOx Manual
Spec Sheet

Frequently Asked Question ("FAQ")

Q1: What are the differences between the ATI-310-N (ATI-310-I-N) and the ATI-310U-N (ATI-310U-I-N)?
A1.1: The ATI-310U-N adds a 3" flue opening for fresh air for combustion intake. The ATI-310-N took in fresh air from the grill at the bottom front of the heater.
1.2. The ATI-310-U complies with Ultra Low NOx standards.
1.3. The water connections at the bottom of the heater are in different locations. The gas connection remains at the far right side.

Related Gadgets

Average Customer Rating:

2 most useful customer reviews
Aug 26, 2016
This customer purchased this item.
Loading...Was this review useful to you? Yes (0) / No (0)
Mar 20, 2016
This customer purchased this item.
Loading...Was this review useful to you? Yes (0) / No (0)

Type the characters you see in the picture...

The code is case-sensitive and must be entered exactly as above.

Share AO Smith ATI-310U-N Indoor Nat.Gas / LP Ultra-Low NOx Tankless Heater