Save money and buy conveniently with this bundle of the Eccotemp L5, Flojet 12v pump and strainer.
The Eccotemp L5 Portable Tankless Heater is the bestselling and original portable propane water heater in the market today.
Get instant, unlimited hot water wherever you are.
The Eccotemp Portable L5 Tankless Heater is perfect for cabins, campsites, and homes. Take a hot shower, wash your car, give your pets a bath, or even wash your boat.
Add the Eccotemp Portable L5 Tankless Heater to a pressure washer to get even better cleaning.
Ignition is with 2 "D" cell batteries. Great for off grid use or in other areas where there is limited or no electricity supply.
• L5 portable propane water heater
• Flojet 12 volt 2.9 GPM 50 PSI Water Pump, model 03526-14A
• Flojet Water Inlet Strainer, model 01720012S
• On/Off shower head with multiple spray patterns
• CSA regulator with 42" hose for use with 10 to 100 pound propane tanks (including standard 20 lb barbecue grill tanks)
• Garden hose adapter
• 37,500 BTU
• Battery igniter means that no electrical service is required
• Dimensions: 14.5" high without heat shield, 11.5" wide, 4.5" deep. Approx. 20.5" high with heat shield
• Weight is approximately 12 lbs.
• Recommended water pressure operating range: 20 to 80 PSI
• Manual water temperature controls
• Water-controlled ignition: Water pressure between 20 PSI ad 80 PSI and flow rate between 0.75 GPM and 1.0 GPM opens activates ignition
• Gas and water incoming and outgoing connections are 1/2" NPS (National Pipe Thread Straight not tapered)
• One-year manufacturer warranty for heater. 30-day warranty for accesssories (showerhead, hose, gas regulator).
• 20 minute automatic safety shutoff timer. Heater can be started again immediately, or when the showerhead water flow is turned off and on again.
• Gas flow automatically stops when flame goes out
• Gas flow automatically stops when water stops flowing
• Drain valve to aid in waterway removal to protect the heater from damage in freezing temperatures
This unit requires the following clearances away from flammable material: 2" behind the unit, 1 ft. to the right and left of the unit, 3 ft. from a window or from an overhang, and 18" above the ground.
Temperature Increase Per GPM of Incoming Water Flow
|Highest Gas Setting
|Lowest Gas Setting
Click here for the instruction manual and warranty statement
Frequently Asked Question ("FAQ")
Q1: What is the purpose of the On/Off switch at the bottom of the unit?
A1: It allows you to have water flow through the unit without the water being heated. Turning off the gas regulator will achieve the same effect.
Q2: What is the purpose of the flat, angled piece of metal that is attached to the top and back of the heater?
A2: This is the vent hood. Its only purpose is to reflect heat forward.
Q3: How do I add the high temperature sensor?
A3: Inside the unit, at the top right-hand corner is the original sensor. Remove it and replace with the new sensor. For further assistance, please contact Eccotemp at eccotemp.com.