Eemax ProSeries PR011240 11kW 240V Electric Tankless Water Heater

#1 US Brand of Electric Tankless Water Heaters

ProSeries Model # PR011240
Commercial Electric Tankless Water Heater

Don't pay for extra electricity to keep water hot in a large tank. Instead, this Eemax ProSeries water heater has a 99% thermal energy efficiency level that pays for itself. There is no stand-by heat loss as with tank water heaters. This 24/7 energy savings means that you are also reducing your carbon footprint.

Save 90% space compared to a 80 gallon traditional tank water heater. With the Eemax ProSeries you can mount it practically anywhere. And when your tankless water heater is installed near the point of use, you'll get hot water instantly and save water that usually goes down the drain as you wait for the hot water to arrive.

Features

• 99.8% energy efficient
• Temperature control and display is accessible only inside casing, protecting the settings from unauthorized changes. In contrast, home units have an external temperature control dial and display
• Digital output temperature control from 80°F to 140°F in increments of 1°F.
• Temperature output control setting is self-modulating at 60 times per second to ensure a steady temperature output level
• Instant, endless and consistent hot water
• Simple Installation: 1/2" CF water connectors and 3 foot electric cable included for easy installation
• Copper immersion heating elements with brass tops increase durability. Elements are threaded for quick replacement.
• Compact, clean design

Specifications

• Rated Pressure: 25 psi minimum, 150 psi maximum
• Voltage: 240 volts
• Wattage: 11 kw
• Certifications: ETL Listed to CSA and UL 499
• Temperature Accuracy: +/- 1°F at a steady flow rate
• Standard Temperature Settings: 120°F (Adjustable from 80°F to 140°F)
• Extra features included: Solid, hand-welded heat exchanger. 1/2" NPT adapters. 1/2" compression fittings for water connectors. 3' electric cable
• Size: 11.75" High x 7.25" Wide x 3.75" Deep
• Weight: 7 lbs.

* indicates that 240V units used with 208 voltage single phase current result in 25% reduced temperature output. Note that according to UL standards, the rating plate and installation instructions is for 240V applied voltage. Check with local building code prior to derating the electrical infrastructure.

+ indicates that the temperature has an electronically limited setting on the adjustable thermostat on the front of the unit.

"C" indicates that the unit has been evaluated by and is in compliance with either Underwriters Laboratories (UL) or Intertek (ETL) under CAN/CSA-C22.2 No. 64/No. 88.

Specifications sheet download

Owner's Manual download (Eemax provides this document which is for the HomeAdvantage II series, identical to the ProSeries except for the heater enclosure.)

Warranty