Ecosmart Eco 18 Electric Tankless Hot Water Heater, Medium
Ecosmart Eco 18 Electric Tankless Hot Water Heaters let you enjoy endless hot water when you want it, only when you need it. Go Tankless and Save.
These water heaters are the most powerful Smart Technology electric tankless units in the market today. They are configured for climates with incoming water temperature that ranges from 45 to 60 degrees Fahrenheit.
This chart presents the flow rates at each inlet temperature with the unit's temperature control setting at 105°F.
Example: If you usually use about 2.5 gallons per minute (one shower with a water-saver showerhead and one hand sink) simultaneously, find the 2.5 GPM on the chart or the number closest to it. If the number is highlighted in GREEN, then it is the correct model for you. If it is highlighted in YELLOW, that means you can get by with it. If it is highlighted in RED, you have to consider a more powerful model.
@ 240 V
|ECO 27||3 x 40 AMPS DP||112.5 AMPS||200 AMPS||3 x #8 AWG Copper|
|ECO 24||3 x 40 AMPS DP||100 AMPS||200 AMPS||3 x #8 AWG Copper|
|ECO 18||2 x 40 AMPS DP||75.0 AMPS||150 AMPS||2 x #8 AWG Copper|
|ECO 11||1 x 60 AMPS DP||57.0 AMPS||125 AMPS||1 x #6 AWG Copper|
|ECO 8||1 x 40 AMPS DP||33.0 AMPS||100 AMPS||1 x #8 AWG Copper|
|POU 6||1 x 30 AMPS||29.0 AMPS||100 AMPS||1 x #10 AWG Copper|
|POU 3.5||1 x 30 Amps||29.0 AMPS||100 AMPS||1 x #10 AWG Copper|
Wire gauge and breaker size must meet all applicable provincial, state, local, and national electrical codes for your area. These are only guidelines that may apply to most installations. Some codes require use of an electrical sub-panel, especially when heater isn't mounted within the line-of-sight of the main electrical panel. Wiring should be sized to maintain a voltage drop of less than 3% under load.
If your home is already equipped with a large number of electrical appliances, you may require a larger electrical service than the one recommended above. The above chart contains only guidelines. Please consult with an electrician before placing an order.
How the temperature dial and display work
When water is flowing through this tankless heater, the digital display on the front of the unit shows the water heating temperature that you have set using the dial. To set the temperature, start by turning on any water faucet. The digital display will light up and give you the current temperature setting of the unit. To increase this setting, turn the control knob to "Increase" or "Decrease" your temperature setting. You can set the temperature at any level between 80°F (27°C) and 140°F (60°C). To change the digital display from Fahrenheit to Celsius, simply press the control knob for 3 seconds. Most people feel comfortable showering or bathing at a temperature between 98°F and 105°F (37°C to 41°C). We recommend that you set the output water temperature of your water heater at either 105°F or 110°F (approximately 41°C or 43°C). This will ensure you have adequate hot water to meet all of your household needs while also maximizing your available water flow rate, reducing the risk of scalding to children and the elderly, and increasing the energy savings you achieve.
This product is designed for indoor installation. Installation outdoors is acceptable only if mounted an enclosure that protects it from dust, debris, rain, splashed water, insects, and direct sunlight. It must not be installed where it may be exposed to freezing temperatures. If any moisture is inside it when it freezes, the warranty is void.
How much can you save with ECOSMART's Tankless Water Heaters?
The primary difference between savings associated with storage tank heaters compared to tankless heaters is the amount of energy and time consumed during operation. An electric tankless water heater consumes more energy compared to a tank heater during its use, but it consumes energy for a drastically shorter period of time. The result is a reduction in water heating costs by up to 60%.
The image below contains a visual representation of the concept mentioned above using data taken from independent third party testers. It shows how the storage tank heater keeps drawing power even after the need for hot water has long ceased. In this example, the tank heater used energy for 34.5 minutes just for a 10-minute shower. It also used a total of 2.5 kWh, in comparison to the ECO 27 which consumed just 1.6 kWh. The steadiness in the data represented about the ECO 27 is also an accurate indication of how precise the Self-Modulating Technology is, allowing for very minimal differences in energy consumption.
PSC (Product Safety Consulting, Inc.) is a product testing firm recognized internationally and accredited by several reputable organizations. PSC administered numerous tests that simulate daily hot water usage and then compared the energy consumption results between an ECO 27, the largest model available from ECOSMART, and a 40 gallon water heater from Rheem. Based on an average ten-minute shower consuming two gallons per minute, a 37% savings in energy consumption was confirmed with the ECO 27. This figure is based on usage comparison and does not take into account energy loss associated with Cycling Loss and Standby-by Loss which may be accountable for up to 20% energy loss. This loss included, the ECO 27 uses up to 57% less energy compared to a standard electric storage tank water heater.
Installation Help and Recommendations
We recommend that you have a professional tankless water heater installer review the above recommendations. Need an installer? Get 4 FREE Tankless Water Heater Installation Estimates Now. It's Quick and Easy!
Contractors: Get Targeted Consumer Leads in Your Area Now.
Contractors: Apply for Wholesale Pricing from GadgetsGo.com.