Eemax SPEX2412 120V 20 amp FlowCo Commercial Electric Water Heater

Eemax SPEX2412 Flow Co 2400 Watt 110V-120V water heater for LOW FLOW point-of-use applications. Fixed temperature increase.

Feature Highlights

≈ Mount it in any direction/orientation
≈ Self-diagnostics to protect internal components
≈ InfoCue LED lights show system and operation status
≈ SafeStart technology prevents element burn-out when water is not running.'

SPEX2412 replaced the EX2412 Flow Co model in 2018.

Feature Details

• 99% energy efficient
• Save water with water heating at the point of use
• Continuous hot water. No storage capacity to run out
• Eliminate long pipe runs by heating water at the point of use
• Easy installation with one cold or hot water line. 3/8" ID compression fittings instead of costly sweat connections
• No T&P relief valve needed (most areas, check local codes)
• High temperature limit switch (ECO)
• Small, compact design
• Warranty against failure due to leaks of heater body or element assembly: 5 years on parts, 1 year labor

Specifications

• Dimensions: 5.25" H x 10.5" W x 3" D
• Field Replaceable Ni Chrome cartridge insert
• Weight: 2.75 to 3.0 lbs, depending on model
• Cover material: White ABS, UL rated 94 5VA (UL listing number E86887)
• Dynamic Operating Pressure Range: 30 PSI to 150 PSI
• NoLead/Lead-free compliance: The wetted surface of this product contacted by water contains less than 0.25% lead and meets ANSI/NSF 372.
• UL listed in accordance with NSF/ANSI 372 MH49688

Table of specifications for all FlowCo models

¹ 208V single phase can be applied to 240V units with 25% reduced temperature output. The rating plate and installation instructions are according to 240V voltage use. Check with local building code prior to derating.

Documentation

• Spec Sheet
• Installation/Owner's Manual
• Warranty

Eemax is the #1 US Brand of Electric Tankless Water Heaters