State Industries 540H Series Ultra-Low NOx Condensing Tankless Water Heater


$1610.00


Retail Price: $2090.00
Weight: 62.00 lbs
MPN: GTS-540-NIH

Gas Type:
Installation:
Rush Order:
Quantity

Get an endless supply of hot water from a compact, wall-mounted tankless water heater that will afford you substantial savings in energy costs.

The 540H is ideal for residential and commercial applications like beauty salons small restaurants. Complies with Ultra-Low NOx regulations. Features a heat exchanger tubing made from HRS35 copper alloy. The 540H is also suitable for heavy residential uses such as domestic recirculation systems or space heating. The indoor model is certified for use up to 10,100 ft. altitude.

Features

Freeze Protection

Every tankless heater by State Industries has an internal freeze protection system, rated to protect the heaters in sub-freezing conditions. This prevents water temperatures in the heat exchanger from falling below a certain level, to prevent freeze damage.

Hi-Limit Switch

This ensures that the water temperature does not exceed dangerous levels. It disengages the gas valves, which effectively shuts down the water heater.

Air-Fuel Ratio Sensor

State's unique sensor monitors and maintains optimal combustion at all times. The onboard computer adjusts the fan motor speed to make sure that air and fuel are mixed in the proper ratio to minimize emissions and maximize efficiency.

HRS35 Copper Alloy

The HRS35 copper alloy is heat-resistant, with additive elements which make it much harder and stronger than the standard C1220 copper alloy commonly used in other heat exchangers. HRS35 is 8 times stronger than regular copper, even at high temperatures. It's also resistant to the damaging effects of erosion which is the leading cause of leaks in heat exchangers.

Drum Thickness

At every ignition cycle, thermal expansion causes every heat exchanger to undergo heat stress. The thousands of ON/OFF cycles typical in commercial applications can be damaging to water heaters. This is why State Industry's commercial products utilize heat exchangers with drums that are 25% thicker to ensure durability. A thicker drum produces less strain for the heat exchanger.

316L Stainless Steel Secondary Heat Exchanger

The secondary heat exchanger, where the rest of the heat transfer happens, is made from high quality 316L stainless steel. Lower temperature causes acidic condensation, and stainless steel is needed to avoid corrosion. 316L stainless steel is more suitable in condensing heat exchangers because of the extreme environment (heat, chloride, acidic condensation) that the material is constantly subjected to.

Better Water Pathway Design

By redirecting and redesigning water flow, the heat exchanger drum and finned coil's temperature stay above dew point, making it more difficult for condensation to build up.

Fin Pitch

Widening the pitch at the heat exchanger fins not only improves durability by reducing blockage, but it also maintains higher temperature levels on the upper finned coils. Keeping an elevated temperature at these coils reduces the chances of condensation buildup.

Match the Unit to Your Needs

  

Warmer Climates

70°F Incoming
Groundwater Temperature

Colder Climates

50°F Incoming
Groundwater Temperature

Capacity - Number of Shower Heads
GTS-110/U 2 1
GTS-310/U 3 2
GTS-240H 2 1
GTS-340H 3 2
GTS-540H 4 3
GTS-510/U 4 2
GTS-710 4 3
GTS-910 6 4

Flow Rate Guide

Temp Rise 110/U 310/U 510/U 240H 340H 540H 710 910
30° 6.6 8.0 10.0 6.6 8.0 10.0 9.0 14.5
35° 6.6 8.0 9.3 6.6 8.0 10.0 9.0 14.5
40° 5.7 7.8 8.1 6.6 8.0 9.5 9.0 14.5
45° 5.1 6.9 7.2 6.6 7.6 8.4 8.5 13.5
50° 4.6 6.2 6.5 6.1 6.8 7.6 7.7 12.2
55° 4.2 5.7 5.9 5.5 6.2 6.9 7.0 11.1
60° 3.8 5.2 5.4 5.1 5.7 6.3 6.4 10.1
65° 3.5 4.8 5.0 4.7 5.3 5.8 5.9 9.4
70° 3.3 4.4 4.7 4.3 4.9 5.4 5.5 8.7
75° 3.1 4.1 4.3 4.1 4.6 5.0 5.1 8.1
80° 2.9 3.9 4.1 3.8 4.3 4.7 4.8 7.6
85° 2.7 3.7 3.8 3.6 4.0 4.4 4.5 7.2
90° 2.5 3.5 3.6 3.4 3.8 4.2 4.3 6.8
95° 2.4 3.3 3.4 3.2 3.6 4.0 4.0 6.4
100° 2.3 3.1 3.3 3.0 3.4 3.8 3.8 6.1

Specifications

  Natural Gas Liquid Propane
Installation Type Indoor, Outdoor, SCH 40 PVC Direct Vent
Dimensions 23-5/8" (H) X 17-3/4" (W) X 11-1/4" (D)
Weight DV: 59 lbs OS:59 lbs
Electric 120 V, 1.27 A (Operation), 0.07 A (Standby), 1.73 A (Freeze-Protection)
Ignition Electronic Ignition
Noise Level 55 dB at Max output
Min. Input 15,000 BTU/h 13,000 BTU/h
Max. Input 199,000 BTU/h 199,000 BTU/h
Energy Factor 0.95 0.95
Min Gas Pressure 5.0" W.C. 8.0" W.C.
Max Gas Pressure 10.5" W.C. 14.0" W.C.
Flow Rate 10 GPM. Values based on factory testing. 0.4 GPM required for continuous fire after initial ignition.
Hot/Cold/Gas
Connection
3/4" NPT
Coil Capacity ≈0.2 Gallons
Water Pressure 15-150 PSI. Pressure Only Relief Valve Requires (Min 200,000 BTUs. 150 PSI). 40 psi or above recommended for max. flow.
Easy-Link System Up to 4 units, with no need for a system controller.
Multi-Unit System Up to 20 units, with Multiple-Unit Controller 9008300005.
Dipswitches 100°F 105°F 110°F 115°F 120°F (Default) 125°F 130°F 135°F 140°F, 145°F 150°F 155°F 160°F 165°F 170°F 175°F and 185°F (17 options)
Temperature Settings 100°F to 185°F with 5°F intervals (16 options), 120°F Default Factory Setting
Remote Control With 9008172005 remote (max. distance 400’ from heater, non-polarized 18 gauge wiring.)

Dimensions

Warranty

  •  Residential Use: 15 yrs limited heat exchanger, 5 yrs limited parts
  •  Commercial Use: 10 yrs limited heat exchanger, 5 yrs limited parts

Downloads

  •  Product Guide
  •  User's Manual
  •  Spec Sheet

Related Gadgets

Average Customer Rating:


1 Most useful customer reviews
Jennifer
Aug 7, 2016
This customer purchased this item.
Loading...Was this review useful to you? Yes (2) / No (0)
*
*
*

Type the characters you see in the picture...



*

Share State Industries 540H Series Ultra-Low NOx Condensing Tankless Water Heater


Share
Share

Bestsellers