State Industries 140H Series Ultra-Low NOx Condensing Tankless Water Heater


$1196.00


Retail Price: $1560.00
Weight: 62.00 lbs
MPN: GTS-140-NIH

Gas Type:
Installation:
Rush Order:
Quantity

Get an endless supply of hot water from a compact, wall-mounted tankless water heater that will afford you substantial savings in energy costs.

The 140H series provides a high efficiency, Ultra-Low NOx condensing water heater that allows the use of 3" PVC venting. It features a copper alloy primary heat exchanger and a Marine-grade stainless steel secondary heat exchanger.

Features

Freeze Protection

Every tankless heater by State Industries has an internal freeze protection system, rated to protect the heaters in sub-freezing conditions. This prevents water temperatures in the heat exchanger from falling below a certain level, to prevent freeze damage.

Hi-Limit Switch

This ensures that the water temperature does not exceed dangerous levels. It disengages the gas valves, which effectively shuts down the water heater.

Air-Fuel Ratio Sensor

State's unique sensor monitors and maintains optimal combustion at all times. The onboard computer adjusts the fan motor speed to make sure that air and fuel are mixed in the proper ratio to minimize emissions and maximize efficiency.

HRS35 Copper Alloy

The HRS35 copper alloy is heat-resistant, with additive elements which make it much harder and stronger than the standard C1220 copper alloy commonly used in other heat exchangers. HRS35 is 8 times stronger than regular copper, even at high temperatures. It's also resistant to the damaging effects of erosion which is the leading cause of leaks in heat exchangers.

Drum Thickness

At every ignition cycle, thermal expansion causes every heat exchanger to undergo heat stress. The thousands of ON/OFF cycles typical in commercial applications can be damaging to water heaters. This is why State Industry's commercial products utilize heat exchangers with drums that are 25% thicker to ensure durability. A thicker drum produces less strain for the heat exchanger.

316L Stainless Steel Secondary Heat Exchanger

The secondary heat exchanger, where the rest of the heat transfer happens, is made from high quality 316L stainless steel. Lower temperature causes acidic condensation, and stainless steel is needed to avoid corrosion. 316L stainless steel is more suitable in condensing heat exchangers because of the extreme environment (heat, chloride, acidic condensation) that the material is constantly subjected to.

Better Water Pathway Design

By redirecting and redesigning water flow, the heat exchanger drum and finned coil's temperature stay above dew point, making it more difficult for condensation to build up.

Fin Pitch

Widening the pitch at the heat exchanger fins not only improves durability by reducing blockage, but it also maintains higher temperature levels on the upper finned coils. Keeping an elevated temperature at these coils reduces the chances of condensation buildup.

Match the Unit to Your Needs

  

Warmer Climates

70°F Incoming
Groundwater Temperature

Colder Climates

50°F Incoming
Groundwater Temperature

Capacity - Number of Shower Heads
GTS-110/U
2 1
GTS-310/U
3 2
GTS-240H
2 1
GTS-340H
3 2
GTS-540H
4 3
GTS-510/U
4 2
GTS-710
4 3
GTS-910
6
4

Flow Rate Guide

Temp Rise
110/U
310/U
510/U
240H
340H
540H
710
910
30°
6.6
8.0
10.0
6.6
8.0
10.0
9.0
14.5
35°
6.6
8.0
9.3
6.6
8.0
10.0
9.0
14.5
40°
5.7
7.8
8.1
6.6
8.0
9.5
9.0
14.5
45°
5.1
6.9
7.2
6.6
7.6
8.4
8.5
13.5
50°
4.6
6.2
6.5
6.1
6.8
7.6
7.7
12.2
55°
4.2
5.7
5.9
5.5
6.2
6.9
7.0
11.1
60°
3.8
5.2
5.4
5.1
5.7
6.3
6.4
10.1
65°
3.5
4.8
5.0
4.7
5.3
5.8
5.9
9.4
70°
3.3
4.4
4.7
4.3
4.9
5.4
5.5
8.7
75°
3.1
4.1
4.3
4.1
4.6
5.0
5.1
8.1
80°
2.9
3.9
4.1
3.8
4.3
4.7
4.8
7.6
85°
2.7
3.7
3.8
3.6
4.0
4.4
4.5
7.2
90°
2.5
3.5
3.6
3.4
3.8
4.2
4.3
6.8
95°
2.4
3.3
3.4
3.2
3.6
4.0
4.0
6.4
100°
2.3
3.1
3.3
3.0
3.4
3.8
3.8
6.1

Specifications

  Natural Gas Liquid Propane
Minimum BTU/h
15,000
Maximum BTU/h
120,000
Minimum inlet gas pressure
5.0 WC
8.0 WC
Maximum inlet gas pressure
10.5 WC
14.0 WC
Energy factor
0.93
Maximum Output
6.6 GPM
Hot/Cold Connection
3/4" NPT
Gas Connection
1/2" NPT
Height 22-7/8"
Width 13-7/8"
Depth 10-13/16"
Weight 44 lbs

Warranty

  •  Residential Use: 15 yrs limited heat exchanger, 5 yrs limited parts
  •  Commercial Use: 10 yrs limited heat exchanger, 5 yrs limited parts

Downloads

  •  Product Guide
  •  User's Manual
  •  Spec Sheet

Related Gadgets


No reviews exist

*
*
*

Type the characters you see in the picture...



*

Share State Industries 140H Series Ultra-Low NOx Condensing Tankless Water Heater


Share
Share

Bestsellers