The PipeCut 360E is the portable, all-purpose pipe cutter that professionals use.
Exact pipe cutters are specially designed for professional use. All Exact pipe cutters are easy to carry, lightweight, and operate on-site. They can cut steel, plastic, copper, cast-iron, and multi-layer pipes. The Exact pipe system cuts straight and clean which is important for welding pipes. Exact saws are not only precise, they are also incredibly fast. Cutting a pipe with a 1/8" wall and 6" diameter takes less than 20 seconds.
The PipeCut 360E has the largest cutting range of the Exact universal pipe saws. Features include automatic overload protection, two-stage motor speed control, constant torque, and soft start. It cuts easily, even through the toughest cast iron pipe. It was designed and constructed to withstand even the most demanding conditions.
This is the pipe fitter's most valuable tool at the installation site. The PipeCut 360E pipe saw can only be used to cut round pipes. PipeCut 360E pipe saw is not intended for use in industrial production. PipeCut 360E pipe saw is intended for short, intermittent use for no more than 2.5 minutes during a 10-minute period.
Specifications
| Pipe Ø (OD) |
75mm – 360mm (3"- 14") |
| Maximum pipe wall thickness |
10mm (0.4") for steel. 43mm (1.7") for plastic |
| Cuts the following pipe materials |
Steel, copper, cast iron, stainless steel, acid-resistant steel, multi-layered materials and
all plastics |
| Voltage / Current (N. America, UK, UAE) |
110V, 120V / 15A |
Voltage / Power (Europe, et. al)
Special order option)
|
230V / 1750W |
| No-Load speed |
I=2900 obr./min, II=3900 obr./min |
| Blade diameter |
165mm (6.50") |
| Mounting bore |
62mm (2.44") |
| Weight |
14.5kg (31 lbs) |
| Range of use |
75mm – 360mm (3"- 14") |
| Electronical unit |
Blade speed preselection, automatic fuse, soft start, torque control |
| Speed preselection |
I = Stainless steel and acid-resistant steel, II = all other materials |
| Loading capacity of supports |
465 kg, 1025 lb (3 supports) |
Included items
• PipeCut Bag
• TCT 165 blade (fitted)
• Operating instructions
• Pipe Support 360 Double and 2x 360 Single
• Exact PipeCut 360E pipe saw
• 5 mm and 2 mm hex socket key (fitted)
• DVD video disc including instructions
Blade information for Exact PipeCut saws
¤ TCT blades (tungsten carbide tip): Use for cutting steel, aluminium, copper, and all types of plastics. TCT blades can be sharpened.
¤ Cermet blades (ceramic alloy tip): Use for cutting stainless steel, steel, aluminium, copper, acid proof materials, and all types of plastics. Cermet blades can be sharpened.
¤ Diamond blades: Use for cutting cast iron only. Diamond blades cannot be sharpened.
PipeCut 360E speed control recommendations
Stainless steel: I
Steel: II
Cast-iron: II
Plastics: II
Frequently Asked Question ("FAQ")
Q1: What is the difference between the 360 and 360E?
A1: The 360E has an added electronic sensor and microprocessor which will adjust the motor speed according to the load. For example, when the 360E is powered on and blade is spinning, but not cutting anything, then the motor speed will be throttled down. This protects the motor and extends its life.
Q2: I see there are two voltages listed in the specs: 110V and 230V. Does one unit switch between the voltages as needed, like a switching power supply?
A2: No, it does not have both voltages in one unit. There are two voltage versions of the 360E, one with 110/120V AC and one with 230V AC. The 110V version is available for immediate shipment. Please contact us if you require the 230V version.
