Products

Fresh air intake hood for attachment to outside wall.Single wall galvanized steel Use this 3" Z-Vent fresh air intake hood to bring in fresh air to...

Flat Roof/Chimney Flashing For use with conjunction with a rain cap or storm collar for vertical installations of the Z-Flex pipe on flat roofs. Z...

Z-Flex 3" to 24" Double-Wall Thimble, Stainless Steel Adjustable Use with double-wall pipe going through a combustible wall. Features: • Width can...

Designed for use in a vertically-installed Z-Vent. Supports the vent run above the flashing. Also has built in storm collar. Also for use with a ro...

This termination coupling can be used as the last part of a horizontal venting system if you wish to exhaust straight out the side wall. The produc...

Termination hood for horizontal exhaust vents, single wall stainless steel The termination hood is the final piece in a horizontal venting system f...

3", 4" or 5" Wide (Extended) Version of the Stainless Steel Adjustable Wall Thimble The 3" and 4" diameter versions of this thimble have a length ...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger and freezing it and damaging the heater Specificat...

Z-Vent by Novaflex Horizontal Drainpipe with 3/8" Condensation Drain Port. Available in 3" or 4" pipe diameters. Z-Flex Z-Vent is approved for Cate...

Z-Vent Flashing 0-30° This roof flashing for use with a rain cap and storm collar for vertical installations of the Z-Vent stainless steel double ...

Z-Vent Double Wall Pipe Z-Flex is the leading manufacturer of specialty venting systems for furnaces, boilers, tankless water heaters, water heater...

Rain Cap with Wind Band for Single Wall Pipe This rain cap was designed to terminate a vertical stack to prevent the entrance of rain and debris in...

Z-Vent Adjustable Roof Flashing, single wall for various diameters. Standard roof slope. Adjustable from 0° to 30° (0/12 to 6/12) pitch Features: ...

15, 30, 45 or 90 Degree Stainless Steel Elbow in diameters from 3" to 24".Choose your variant in the menu. Features: • Simple gasketed connection ...

A: 3"B: 4"C: 7" Z-Flex Stainless Steel Increaser, 3" to 4" Used to upsize a vent system. Features • Vent material: AL29-4C stainless ste...

A: 3"B: 5"C: 8.15" Z-Flex Stainless Steel Increaser, 3" to 5" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 4"B: 5"C: 7" Z-Flex Stainless Steel 4" to 5" Pipe Diameter Increaser (not eccentric) Used to upsize a vent system. Recommended for us...

A: 4"B: 6"C: 8.15" Z-Flex Stainless Steel Increaser, 4" to 6" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 4"B: 8"C: 10.3" Z-Flex Stainless Steel Increaser, 4" to 8" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 5"B: 6"C: 7" Z-Flex Stainless Steel Increaser, 5" to 6" Used to upsize a vent system. This part is not the eccentric (longer length) ...

A: 6"B: 7"C: 7" Z-Flex Stainless Steel Increaser, 6" to 7" (not eccentric) Used to upsize a vent system. Features • Vent material: AL29-...

Flat flashing provides weather protection at the spot where the vent penetrates your chimney or roof. Fits flat or slightly sloped (up to 5°) roofs...

Z-Vent Tee Cap with Drain A tee cap with drain is needed at the bottom of a vertical vent stack. A high temperature silicone tube is available sep...

Stainless Steel Wall Thimble, Standard (not Wide) WidthOn this page, choose from 3" to 24" diameter pipe sizes The 3" and 4" diameter versions of ...

NovaFlex Z-Flex Single-wall Z-Vent Pipe Z-Flex is the leading manufacturer of specialty venting systems for furnaces, boilers, tankless water heate...

The 3" or 4" Z-Flex vertical single-wall vent kit is designed for use with through-roof installations of indoor water heaters. Made of durable AL-2...

Z-Flex constant tension clamps feature a 1/2" wide stainless steel band and 5/16" hex slotted head. They are fully adjustable and ideal for flexibl...

Z-Vent Steep Adjustable Roof Flashing, single wall for various diameters Adjustable from 30° to 45° (7/12 to 12/12) pitch Use this flashing for ste...

Z-Vent appliance adapter 3" to 24" Appliance adapters connect your boiler or tankless water heater to the proper Z-Flex / Z-Vent diameter. Most ta...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger and freezing it Also, use this part to drain conde...

Vent Termination Hood with backflow preventer (damper). Single not double wall pipe, but will work properly with double wall pipe. Essential for ta...

3" Wall Termination Box, with 10" sleeve, for Horizontal Vents Features and benefits ◊ Special design resists winds that affect the flue's gas flo...

Wall termination for horizontal vents Features and benefits ◊ Special design resists winds that affect the flue's gas flow◊ Flat surface parallel ...

Vertical Drainpipe with Condensation Drain, Single Wall, Class II, III, IV Stainless SteelVarious diameters from 3", 4" 5" up to 14" Use this part ...

Z-Vent Z-Flex 3" or 4" Condensation Drain Vertical Draintee for Single Wall Features: • Simple gasketed connection requires no sealant• Offers the...

3" to 24" Z-Vent Double Wall Straight Tee, Stainless Steel This vent pipe straight T can be used to connect horizontal and vertical vent sections....

Z-Vent Double Wall Straight Tee Cap, Stainless Steel. Many diameters available. A tee cap with drain is used at the bottom of a vertical vent pipe...

3" to 24" Z-Vent Single Wall Straight Tee, Stainless Steel This straight T vent pipe is used to connect horizontal and vertical vent sections. Tee...

Z-Flex Z-Vent 3" or 4" Diameter Termination 90-degree Elbow Includes a metal grid to prevent animals and debris from entering the exhaust system. S...

Z-Vent Double Wall 15/30/45/90 Degree Elbow Used when a direction change or offset is needed. • Vent material: AL29-4C stainless steel• Certificat...

This page includes all diameters for the Fire Stop Spacer Double Wall item. The application is for vertical venting systems. It provide support to ...

This page includes all diameters 3 inch to 24 inch) for the Fire Stop Spacer for single wall vent pipe. Use this with vertical venting systems from...

This page includes all diameters for the Fire Stop Support for Single Wall Vent Pipe. The application is for vertical venting systems. This gadget ...

This page includes all diameters for the Fire Stop Support for Single Wall Vent Pipe. The application is for vertical venting systems. This gadget ...

This special, high-temperature sealant compound is necessary with some appliance flue to vent pipe adapters to create a positive pressure seal. Gen...

Use this to make a transition and convert your venting run from Z-Vent single wall vent pipe to double wall pipe. Can also be attached to a single ...

Sta-Rite Pentair Pool Heater Adapter, 4" Diameter by Z-Flex Z-Vent This adapter creates a way to connect your Pentair pool heater to Z-Vent's Clas...