![EcoSmart ECO8 8kW 240V Electric Tankless Hot Water Heater](http://gadgetsgo.com/cdn/shop/products/EcoSmartEco88kW240VElectricTanklessHotWaterHeater_1_700x700.jpg?v=1632085417)
![EcoSmart ECO8 8kW 240V Electric Tankless Hot Water Heater](http://gadgetsgo.com/cdn/shop/products/EcoSmartEco88kW240VElectricTanklessHotWaterHeater_1_700x700.jpg?v=1632085417)
The EcoSmart ECO 8 Electric Tankless Hot Water Heater lets you enjoy endless hot water when you want it, only when you need it. Go Tankless and Save.
Get rid of your tank and get:
Energy savings: The EcoSmart Smart Technology electric tankless water heater can save you as much as 60% off your water heating bills. Even if it costs the same or less than a regular tank water heater. Energy efficiency rating is 99.8%. It will definitely pay for itself many times over.
Extra space: EcoSmart's tankless design saves you a large amount of space for storage (see picture below).
Luxury and comfort: Never run out of hot water.
Convenience: The Digital Temperature Dial lets you easily set your preferred maximum hot water temperature up to 125-degrees Fahrenheit.
Safe Self Modulating Technology: Electric inline water heater does not cause spikes in the electrical current.
30-Day Money-Back Guarantee and a Lifetime Warranty
These water heaters are the most powerful Smart Technology electric tankless units in the market today. Perfect for homes, schools, clinics, health facilities, manufacturing facilities, hotels, offices, motels, warehouses, restaurants, and many other places.
How to choose your water heater modelStep 1: Add up the flow rates of all the water use points that you expect to simultaneously use. It does not matter whether your home has 2 showers, 4 sinks, a dishwasher and a clothes washer. What only matters is which of them you expect to run at the same time. See Chart A. Step 2: Determine your coldest incoming water temperature of the year. Step 3. Take your info from Step 1 and 2 and look up the info on Chart B. Step 4: Ensure you have sufficient electrical service. See "Electrical Requirements" chart below. |
Chart A This chart is based on the use of water saver showerheads rated at 1.5 GPM and water saver aerators for sinks rated at 1.0 GPM. The number of showerheads and sinks next to each model reflects the model unit's capacity to make hot water simultaneously with the unit's temperature control set to 105°F. Note: The shower temperature that most people prefer is between 98°F to 105°F. |
Chart B
Inlet Water Temperature → |
40°F | 45°F | 50°F | 55°F | 60°F | 65°F | 70°F | 75°F | 80°F |
ECO 8 (this page) |
.85 GPM | .90 GPM | 1.0 GPM | 1.1 GPM | 1.2 GPM | 1.4 GPM | 1.5 GPM | 1.8 GPM | 2.2 GPM |
ECO 11 | 1.35 GPM | 1.45 GPM | 1.6 GPM | 1.8 GPM | 2.0 GPM | 2.2 GPM | 2.5 GPM | 3.0 GPM | 3.5 GPM |
ECO 18 | 1.9 GPM | 2.0 GPM | 2.2 GPM | 2.4 GPM | 2.7 GPM | 3.1 GPM | 3.5 GPM | 4.1 GPM | 5.0 GPM |
ECO 24 | 2.5 GPM | 2.7 GPM | 3.0 GPM | 3.3 GPM | 3.8GPM | 4.1 GPM | 4.7 GPM | 5.4 GPM | 6.5 GPM |
ECO 27 | 2.8 GPM | 3.1 GPM | 3.4GPM | 3.7 GPM | 4.2 GPM | 4.8 GPM | 5.2 GPM | 6.1 GPM | 7.3 GPM |
This chart presents the flow rates at each inlet temperature with the unit's temperature control setting at 105°F.
Electrical Requirements
Before purchasing an EcoSmart, please make sure that your home has sufficient electrical capacity. Please refer to this chart for electrical requirements:
Model | Recommended Breaker |
Maximum Amperage @ 240 V |
Recommended Household Electrical Service |
Recommended Minimum Wire Gauge |
ECO 27 | 3 x 40 AMPS DP | 112.5 AMPS | 200 AMPS | 3 x #8 AWG Copper |
ECO 24 | 3 x 40 AMPS DP | 100 AMPS | 200 AMPS | 3 x #8 AWG Copper |
ECO 18 | 2 x 40 AMPS DP | 75.0 AMPS | 150 AMPS | 2 x #8 AWG Copper |
ECO 11 | 1 x 60 AMPS DP | 57.0 AMPS | 125 AMPS | 1 x #6 AWG Copper |
ECO 8 | 1 x 40 AMPS DP | 33.0 AMPS | 100 AMPS | 1 x #8 AWG Copper |
POU 6 | 1 x 30 AMPS | 29.0 AMPS | 100 AMPS | 1 x #10 AWG Copper |
POU 3.5 | 1 x 30 Amps | 29.0 AMPS | 100 AMPS | 1 x #10 AWG Copper |
Wire gauge and breaker size must meet all applicable provincial, state, local, and national electrical codes for your area. These are only guidelines that may apply to most installations. Some codes require you to have an electrical sub-panel, especially if the heater is not mounted within the line-of-sight of the main electrical panel. Wiring should be sized to maintain a voltage drop of less than 3% under load.
If your home is already equipped with a lot of electrical appliances, you may require a larger electrical service than the one recommended in the chart. The above chart contains only guidelines. Please consult with an electrician before placing an order.
Downloads
Download Installation and Owner's Manual
Download Troubleshooting Guide for Electricians
|
Save space. Look at how much space you save with our ondemand hot water heater compared to a water heater tank. |
Frequently Asked Questions ("FAQ")
Q1: How do I replace the heating element on the ECO 8?
A1. Replacing the heating element on the Ecosmart ECO8 tankless water heater is fairly simple. But since removing the water heater cover is necessary, and there is a risk of injury or death due to high voltage, Ecosmart recommends that a licensed electrician do the work. Here are the steps:
1. Disconnect power.
2. Remove cover.
3. Unscrew the two steel screws on the end of the element plug and remove the two wires.
4. Unscrew the element from the heating chamber. The ECO8 uses one element.
5. Tightly, securely screw in new elements and replace wires and cover.
The ECO 8 heating element is available for purchase here.
Q2: How do the temperature dial and display work?
A2: When water is flowing through this tankless heater, the digital display on the front of the unit shows the water heating temperature that you have set using the dial. To set the temperature, start by turning on any water faucet. The digital display will light up and give you the current temperature setting of the unit. To increase this setting, turn the control knob to "Increase" or "Decrease" your temperature setting. You can set the temperature at any level between 80°F (27°C) and 140°F (60°C). To change the digital display from Fahrenheit to Celsius, simply press the control knob for 3 seconds. Most people feel comfortable showering or bathing at a temperature between 98°F and 105°F (37°C to 41°C). We recommend that you set the output water temperature of your water heater at either 105°F or 110°F (approximately 41°C or 43°C). This will ensure you have adequate hot water to meet all of your household needs while also maximizing your available water flow rate, reducing the risk of scalding to children and the elderly, and increasing the energy savings you achieve.
Q3: Can I install the ECO 8 outdoors?
A3: Ecosmart tankless water heaters are designed for indoor installation. Installation outdoors is acceptable only if mounted an enclosure that protects it from dust, debris, rain, splashed water, insects, and direct sunlight. It must not be installed where it may be exposed to freezing temperatures. If any moisture is inside it when it freezes, the warranty is void.
Q4: How much can I save with ECOSMART's Tankless Water Heaters?
A4: The primary difference between savings associated with storage tank heaters compared to tankless heaters is the amount of energy and time consumed during operation. An electric tankless water heater consumes more energy compared to a tank heater during its use, but it consumes energy for a drastically shorter period of time. The result is a reduction in water heating costs by up to 60%.
The image below contains a visual representation of the concept mentioned above using data taken from independent third party testers. It shows how the storage tank heater keeps drawing power even after the need for hot water has long ceased. In this example, the tank heater used energy for 34.5 minutes just for a 10-minute shower. It also used a total of 2.5 kWh, in comparison to the ECO 27 which consumed just 1.6 kWh. The steadiness in the data represented about the ECO 27 is also an accurate indication of how precise the Self-Modulating Technology is, allowing for very minimal differences in energy consumption.
PSC (Product Safety Consulting, Inc.) is a product testing firm recognized internationally and accredited by several reputable organizations. PSC administered numerous tests that simulate daily hot water usage and then compared the energy consumption results between an ECO 27, the largest model available from ECOSMART, and a 40 gallon water heater from Rheem. Based on an average ten-minute shower consuming two gallons per minute, a 37% savings in energy consumption was confirmed with the ECO 27. This figure is based on usage comparison and does not take into account energy loss associated with Cycling Loss and Standby-by Loss which may be accountable for up to 20% energy loss. This loss included, the ECO 27 uses up to 57% less energy compared to a standard electric storage tank water heater.
Installation Help and Recommendations
We recommend that you have a professional tankless water heater installer review the above recommendations. Need an installer? Get 4 FREE Tankless Water Heater Installation Estimates Now. It's Quick and Easy!
Contractors: Get Targeted Consumer Leads in Your Area Now.
Contractors: Apply for Wholesale Pricing from GadgetsGo.com.
How much can you save with ECOSMART's Tankless Water Heaters?
The primary difference between savings associated with storage tank heaters compared to tankless heaters is the amount of energy and time consumed during operation. An electric tankless water heater consumes more energy compared to a tank heater during its use, but it consumes energy for a drastically shorter period of time. The result is a reduction in water heating costs by up to 60%.
The image below contains a visual representation of the concept mentioned above using data taken from independent third party testers. It shows how the storage tank heater keeps drawing power even after the need for hot water has long ceased. In this example, the tank heater used energy for 34.5 minutes just for a 10-minute shower. It also used a total of 2.5 kWh, in comparison to the ECO 27 which consumed just 1.6 kWh. The steadiness in the data represented about the ECO 27 is also an accurate indication of how precise the Self-Modulating Technology is, allowing for very minimal differences in energy consumption.
PSC (Product Safety Consulting, Inc.) is a product testing firm recognized internationally and accredited by several reputable organizations. PSC administered numerous tests that simulate daily hot water usage and then compared the energy consumption results between an ECO 27, the largest model available from ECOSMART, and a 40 gallon water heater from Rheem. Based on an average ten-minute shower consuming two gallons per minute, a 37% savings in energy consumption was confirmed with the ECO 27. This figure is based on usage comparison and does not take into account energy loss associated with Cycling Loss and Standby-by Loss which may be accountable for up to 20% energy loss. This loss included, the ECO 27 uses up to 57% less energy compared to a standard electric storage tank water heater.