The MC-601-BK (black exterior color) and MC-601-W (white exterior color) temperature controller are perfect for controlling an interior or exterior, outside Rinnai tankless water heater from the inside comfort of your home. They also allow your Rinnai tankless water heater to set the maximum standard temperature above 140°F for commercial applications, up to 185°F with some models.
• 98°F to 140°F temperature control
• Moisture resistant plastic case
• In-use indicator
• Use up to four touch pads with a Rinnai water heater unit
• On board safety monitoring and diagnostics
• On/off and priority switches
• Dimensions: 1" x 4" x 2"
MC-601-BK and MC-601-W replace the following discontinued controllers:
Alternate item no: MC-601-US-BK
Installation highlights (not comprehensive)
A maximum of 4 temperature controllers can be installed for a water heater or bank of heaters. This includes the built-in controller of an indoor water heater. Controllers can only be wired in parallel, not in series.
The cable for the controller should be:
* minimum gauge of 22 AWG
The maximum cable length from each controller to the water heater depends on the total number of wired controllers connected to the water heater. Refer to the following table:
|Number of Wired Controllers||Maximum Cable Length
per Controller to Water Heater
|1||328 ft (100 m)|
|2||164 ft (50 m)|
|3 or 4||65 ft (20 m)|
Rinnai® is a registered trademark of Rinnai Corporation. GadgetsGo is not associated with or sponsored by Rinnai Corporation.