Stainless Steel Wall Thimble, Standard (not Wide) Width
On this page, choose from 3" to 24" diameter pipe sizes
The 3" and 4" diameter versions of this thimble have a length (across the side of the wall) of 10" x 10". The width (through to the outside of the wall) adjusts from 4" to 7".
Features
• No sealant required - fits together with a simple gasketed connection
• Gives you the highest pressure rating available
• Can be cut to the length you need on site
• Smooth finish and perfect fit with new fusion-welded pipe seams
• Compatible with all Z-Flex Z-Vents
• Vent material: AL29-4C stainless steel
• Certification: Tested to meet or exceed Underwriters Laboratories (UL) spec UL1738 and ULS636
• Approval: Cat II, III, IV venting
• Limited Lifetime Warranty
Compatibility and cross reference:
The 4" diameter version of this item is the same as Takagi part number TK-KPW4-1 and AO Smith, American Heating part number 9008345005. It is half of the kit with part number 9008004005.
The 4" diameter version of this item is compatible with the following tankless water heaters, as shown in their manual:
The 4" diameter version of this item is compatible with the following tankless water heaters, as shown in their manual:
American Water Heaters GT-510-P/N and GT-540-P/N Indoor Liquid Propane/Natural Gas
American Water Heaters GT-310-P/N and GT-340-P/N Indoor Liquid Propane/Natural Gas
American Water Heaters GT-110-P/N and GT-140-P/N Indoor Liquid Propane/Natural Gas
A. O. Smith ATI-510-N/P and ATI-540-N/P Indoor Propane/Natural Gas
A. O. Smith ATI-310-N/P and ATI-340-N/P Indoor Propane/Natural Gas
A. O. Smith ATI-110-N/P and ATI-140-N/P Indoor Propane/Natural Gas
GSW GSWT-110/310
GSW GSWT-520/540
Marey 5L
Marey 10L
Reliance Water Heaters TS-510-GI and TS-540-GI
Reliance Water Heaters TS-310-GI and TS-340-GI
Reliance Water Heaters TS-110-GI and TS-140-GI
State Industries 510/540 Series
State Industries 310/340 Series
State Industries 110/140 Series
Takagi T-T-KJr2 Indoor/Outdoor Propane/NG
Takagi T-K4 Indoor/Outdoor Propane/NG
Takagi T-H3J-DV
Takagi T-H3S-DV
Takagi T-H3-DV
Downloads
Z-Vent SVE Series IV Installation and Maintenance Instructions, 3" to 24", Single & Double Wall
Z-Vent Dimensional Specifications
 |
A |
B |
C |
Part Number |
| 3 |
5 |
10 |
2SVSWTF03 |
| 4 |
6 |
10 |
2SVSWTF04 |
| 5 |
7 |
12 |
2SVSWTF05 (same as 2SVSWT05) |
| 6 |
18 |
24 |
2SVSWTF06 (same as 2SVSWT06) |
| 7 |
19 |
24 |
2SVSWTF07 |
| 8 |
20 |
26 |
2SVSWTF08 |
| 9 |
21 |
26 |
2SVSWT09 |
| 10 |
22 |
28 |
2SVSWT10 |
| 12 |
24 |
30 |
2SVSWT12 |
| 14 |
26 |
33 |
2SVSWT14 |
| 16 |
28 |
36 |
2SVSWT16 |
| 18 |
30 |
38 |
2SVSWT18 |
| 20 |
32 |
38 |
2SVSWT20 |
| 22 |
34 |
42 |
2SVSWT22 |
| 24 |
36 |
42 |
2SVSWT24 |
Frequently Asked Question ("FAQ")
Q1: Can this be used on a ceiling?
A1: Yes, it can. Although designed for through-wall installations, many contractors use this item for vertical vent pipe runs.
Q2: I'm looking at the outside diameter "ØB" for 2SVSWTF05 which is 7 inches. But then it jumps to 18 inches for 2SVSWTF06. This can't be correct.
A2: Indeed it is correct. We've physically measured the part. The 6" diameter thimble is tested to a higher temperature range which requires it to be physically larger.
