More hot water, faster with the Rinnai Sensei series
The Rinnai Sensei series features an enhanced combustion design, to provide a better experience for both users and installers. All key components are manufactured by Rinnai to ensure well-known Rinnai quality.
New condensing technology for colder climates
You get freeze protection down to -4°F for outdoor units or -22°F for indoor units. The Sensei series achieves this by using:
• a new integrated check valve that prevents backflow from outside cold air
• a new fiber mesh premix burner
• programming that temporarily activates the unit during extremely cold weather
Stainless Steel Primary Heat Exchanger
Early in the combustion process, all high efficiency condensing tankless water heaters produce condensate. Rinnai's new R-evolution Primary Stainless Steel Heat Exchanger resists corrosion for better performance in the long run.
Another leading innovation: Venting
The Sensei series offers the most flexible venting options of any tankless. It can use the old condensing vent system when installed as a replacement tankless. Or, new installations can use smaller, lighter, less expensive concentric venting. Approved materials: PP, PVC, CPVC.
The 2" adaptor ring and cap allow for use of 3"x 5" concentric venting or 2" twin pipe venting.
• 14 possible vent configurations
• 9 compatible vent manufacturers
For use with natural gas or propane
Quick and easy conversion to/from NG and LP in just three simple steps. Kit is optional.
Includes
• Isolation Valves Set
• Pressure Release Valve & adapter (can rotate 360 degrees to accommodate varied installations)
• Integrated controller
Specifications
| Dimensions |
Width: 18.5 inches, Height: 26.4 inches, Depth: 11.4 inches
(470 mm x 670 mm x 290 mm)
|
| Weight |
62 lbs / 28.0 kg |
| Installation Type |
Outdoor |
| Minimum/Maximum Gas BTU Range |
15,000 to 130,000 BTU, Natural Gas and Propane
|
| Energy Factor |
0.92 for Natural Gas and Propane
|
| Temperature Range |
Residential: 98°F - 120°F
Commercial: 98°F - 140°F (with parameter adjustment)
|
| Approved Gas Types |
Natural Gas, Liquid Propane |
| Minimum Activation Rate |
0.4 GPM |
| Flow Rate vs. Temperature Rise |
70°F at 3.5 GPM. 50°F at 4.9 GPM
|
| Hot Water Flow Rate Range |
0.26 (after 0.4 GPM activation) to 6.6 GPM (1.0 to 24 L/min)
|
| Controllers |
MC-195T-US (Pump Timer Control, included. Not compatible with WiFi RWM101)
MC-100V-1US
BC-100V-1US
MCC-91-2US (compatible with WiFi RWM101) |
| Ultra Low NOx |
Yes |
| Warranty (Residential) |
15 years on heat exchanger
5 years on other parts and components
1 year on labor |
| Warranty (Commercial) |
8 years on heat exchanger
5 years on other parts and components
1 year on labor |
| Mobile Home Certified |
Yes |
| Certifications |
AHRI, CSA, Energy Star, SCAQM District 14 ng/Jor 20ppm NOx emmision level |
| Safety features |
Flame Failure for the Flame Rod
Boiling Protection
Check for Combustion Fan RPM
Over-current Glass Fuse
Remaining Flame (OHS)
Frost Protection |
| Altitude operation |
Up to 10,200 feet (3109 m) |
Documents
• Rinnai Sensei Series brochure
• Installation & Operation Manual
• Specifications
Frequently Asked Questions ("FAQ")
Q1: What is the difference between the RU, RUR and RUC series?
A1: Rinnai's RU series heaters such as the RU80e and RU90e are simply the outdoor versions of the RUC units.
The RUR series heaters such as the RUR98i and the RUR98e have a built-in recirculation pump. The RUC series heaters such as the RUC98i and the RUC80i do not have the recirc pump.
All of these heaters are condensing.
Rinnai® is a registered trademark of Rinnai Corporation. GadgetsGo is not associated with or sponsored by Rinnai Corporation.
