Hardware

Use this to make a transition and convert your venting run from Z-Vent single wall vent pipe to double wall pipe. Can also be attached to a single ...

Z-Vent Adjustable Roof Flashing, single wall for various diameters. Standard roof slope. Adjustable from 0° to 30° (0/12 to 6/12) pitch Features: ...

This special, high-temperature sealant compound is necessary with some appliance flue to vent pipe adapters to create a positive pressure seal. Gen...

The Exact Tool TCT165 pipe cutting blade has tungsten carbide tips for general purpose use. For the following pipe materials • Steel (non-stainle...

The Rinnai bottom pipe cover gives your installation a clean, professional look while protecting the pipes from damage. Color: matches your Rinnai ...

Z-Vent Tee Cap with Drain A tee cap with drain is needed at the bottom of a vertical vent stack. A high temperature silicone tube is available sep...

PVC, CPVC or PolyPro to Z-Vent Stainless Steel Special Vent Adapter This is commonly used to adapt a Z-Vent pipe piece to a tankless water heater ...

The MC-601-BK (black exterior color) and MC-601-W (white exterior color) temperature controller are perfect for controlling an interior or exterior...

UL-listed Flexible Stainless Steel Round Liner with patented, airtight triple lock construction. Use as chimney liner to vent stove and water heate...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger, freezing it and damaging the heater Specification...

Z-Vent Double Wall Rain Cap with Wind Band. Choose from 3" to 24" diameters. This rain cap terminates vertical stacks and prevents debris or rain ...

Z-Flex Z-Vent Single Wall Boot Tee This Boot Tee allows you to connect horizontal and vertical sections of pipe with low flow resistance. A Tee Cap...

A: 3"B: 4"C: 7" Z-Flex Stainless Steel Increaser, 3" to 4" Used to upsize a vent system. Features • Vent material: AL29-4C stainless ste...

PipeCut V1000 The Exact PipeCut V1000 is an easy-to-use tool for cutting spiral ducts of any size. The ends are cut straight and ready for connect...

Exact Tools PipeCut 220E The PipeCut 220E has a wide cutting capacity. It can be used to cut both plastic and steel pipes. With its rugged constru...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger and freezing it and damaging the heater Specificat...

Use this part to reduce the diameter of your single wall pipe. This is the way to downsize a vent system from a bigger to a smaller diameter. • Ve...

Z-Vent Z-Flex 3" or 4" Condensation Drain Vertical Draintee for Single Wall Features: • Simple gasketed connection requires no sealant• Offers the...

Z-Flex Extreme Weather Rain Cap, available 3, 4 or 5 inch diameters Use this rain cap if the installation region sometimes experiences heavy or dri...

3" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for the Eccotemp FVI-12, Eccotemp i12, 20HI-LP and 20HI-NG, 40HI-LP and 40HI-N...

Z-Vent (Nova Flex Group) Guy Band Double Wall Vent Pipe Support This guy band can be used to stabilize the vent above the roof line or where anoth...

Z-Vent Flashing 0-30° This roof flashing for use with a rain cap and storm collar for vertical installations of the Z-Vent stainless steel double ...

The Cermet 140 blade has ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid-proof steel. For Materials • S...

The Exact Cermet 165 is designed to cut steel, stainless, copper, plastic, and acid proof pipes. For use with the PipeCut 280E, and 360E. The Cerm...

The Exact Diamond X165 Blade by Exact Tool is a special diamond blade only to be used for cutting cast iron pipes, ductile pipes, cast iron with co...

The 3" or 4" Z-Flex vertical single-wall vent kit is designed for use with through-roof installations of indoor water heaters. Made of durable AL-2...

The Eccoflo Triplex Diaphragm 2.9 GPM 50 PSI Water Pump Model ECP12V works great with Eccotemp L5 and L10 models and many other tankless water heat...

Z-Vent Double Wall Straight Tee Cap, Stainless Steel. Many diameters available. A tee cap with drain is used at the bottom of a vertical vent pipe...

The Exact Tool TCT140 blade has tungsten carbide tips for general purpose use. For the following pipe materials • Steel (non-Stainless) • Copper ...

Help protect your Rinnai outdoor-mounted heater from the elements. This genuine Rinnai part is the bottom, horizontal plate for the PCD03-SM2 pipe ...

Vent Pipe Wall Support for Single Wall Pipe by Z-Vent Z-Flex (NovaFlex Group) Can be used with both horizontal and vertical pipe runs. Vent suppor...

This page includes all diameters 3 inch to 24 inch) for the Fire Stop Spacer for single wall vent pipe. Use this with vertical venting systems from...

Flat flashing provides weather protection at the spot where the vent penetrates your chimney or roof. Fits flat or slightly sloped (up to 5°) roofs...

Z-Flex constant tension clamps feature a 1/2" wide stainless steel band and 5/16" hex slotted head. They are fully adjustable and ideal for flexibl...

The MC-91-2W (white exterior color) and MC-91-2S (silver exterior color) controller are perfect for controlling an exterior, outside Rinnai tankles...

Flat Roof/Chimney Flashing For use with conjunction with a rain cap or storm collar for vertical installations of the Z-Flex pipe on flat roofs. Z...