z-flex

This stainless steel adapter is compatible with certain Paloma, Rheem, Noritz heaters, plus the Eccotemp FVI12 and i12 series. It converts the flue...

3" Horizontal Stainless Steel Z-Vent wall-hung water heater vent kit for Eccotemp i12-NG, Eccotemp i12-LP, Eccotemp FVI12-NG, Eccotemp FVI12-LP, 20...

Z-VENT Wall Mounting Water Heater Vent Kit. 4" Diameter, single wall venting system. Save time and money with this convenient, preconfigured vent k...

Z-VENT Wall Mounted/Sideways Vent Kit for Tankless Water Heaters. 4" Diameter Stainless Steel pipe system. Save time and money with this convenient...

Z-VENT Horizontal Wall Mounting Vent Kit for 5" Diameter Heater Flues Save time and money with this convenient, preconfigured vent kit for tankless...

PVC, CPVC or PolyPro to Z-Vent Stainless Steel Special Vent Adapter This is commonly used to adapt a Z-Vent pipe piece to a tankless water heater ...

Kit for venting horizontally through a wall for several different Bosch tankless water heater models. Pipe diameter is the required 3" diameter and...

The 3" Bosch vertical single-wall vent kit is designed for use with through-roof installations of the Bosch Therm 940ES, 830ES, 660EF 2400E, 250SX,...

This Condensate Drain Tube/Hose Kit comes in various lengths: 18", 24", 36" and 60". It connects to steel condensation drain pipe to drain corrosiv...

The 3" Eccotemp vertical single-wall vent kit is designed for use with through-roof installations of various models of indoor water heaters, includ...

3" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit for the Eccotemp FVI-12, Eccotemp i12, 20HI-LP and 20HI-NG, 40HI-LP and 40HI-N...

The 4" Eccotemp vertical single-wall vent kit is designed for use with through-roof installations of various models of indoor water heaters that ha...

3" Horizontal Stainless Steel Z-Vent wall-hung water heater vent kit for Paloma/Rheem models: PTG42 (PTG-42), PH-20 (PH20), RTG-42, RTG-53 and PH-1...

UL-listed Flexible Stainless Steel Round Liner with patented, airtight triple lock construction. Use as chimney liner to vent stove and water heate...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger, freezing it and damaging the heater Specification...

Pentair Sta-Rite 77707-0087 Stainless Steel MasterTemp Pool Heater Adapter, 4" Diameter This adapter creates a way to connect your Pentair MasterT...

Stainless Steel Flex Ready Dripless ConnectorAn Accessory for the Z-Flex Triple Lock Stainless Steel Chimney Liner Used to connect Z-FLEX Stainless...

Vent Pipe Wall Support for Single Wall Pipe by Z-Vent Z-Flex (NovaFlex Group) Can be used with both horizontal and vertical pipe runs. Vent suppor...

Aluminum Triple Lock T/L Flexible Duct by Flexmaster Semi rigid, lightweight, non-insulated, 1 ply aluminum duct. Available in 2", 3", 4", 5" and ...

Aluminum Chimney Liner Kit for Category I Gas Fired Heating Equipment and Gas Fireplaces This Z-Flex Aluminum Chimney Liner Kit includes everything...

3" diameter flexible aluminum duct in your choice of various lengths Semi rigid, lightweight, non-insulated, 1 ply aluminum duct. The part number ...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger and freezing it and damaging the heater Specificat...

Fresh air intake hood for attachment to outside wall.Single wall galvanized steel Use this 3" Z-Vent fresh air intake hood to bring in fresh air to...

Flat Roof/Chimney Flashing For use with conjunction with a rain cap or storm collar for vertical installations of the Z-Flex pipe on flat roofs. Z...

Z-Flex 3" to 24" Double-Wall Thimble, Stainless Steel Adjustable Use with double-wall pipe going through a combustible wall. Features: • Width can...

Designed for use in a vertically-installed Z-Vent. Supports the vent run above the flashing. Also has built in storm collar. Also for use with a ro...

This termination coupling can be used as the last part of a horizontal venting system if you wish to exhaust straight out the side wall. The produc...

Termination hood for horizontal exhaust vents, single wall stainless steel The termination hood is the final piece in a horizontal venting system f...

3", 4" or 5" Wide (Extended) Version of the Stainless Steel Adjustable Wall Thimble The 3" and 4" diameter versions of this thimble have a length ...

Useful in colder climates for preventing freezing air from flowing back into the heat exchanger and freezing it and damaging the heater Specificat...

Z-Vent by Novaflex Horizontal Drainpipe with 3/8" Condensation Drain Port. Available in 3" or 4" pipe diameters. Z-Flex Z-Vent is approved for Cate...

Z-Vent Flashing 0-30° This roof flashing for use with a rain cap and storm collar for vertical installations of the Z-Vent stainless steel double ...

Z-Vent Double Wall Pipe Z-Flex is the leading manufacturer of specialty venting systems for furnaces, boilers, tankless water heaters, water heater...

Rain Cap with Wind Band for Single Wall Pipe This rain cap was designed to terminate a vertical stack to prevent the entrance of rain and debris in...

Z-Vent Adjustable Roof Flashing, single wall for various diameters. Standard roof slope. Adjustable from 0° to 30° (0/12 to 6/12) pitch Features: ...

15, 30, 45 or 90 Degree Stainless Steel Elbow in diameters from 3" to 24".Choose your variant in the menu. Features: • Simple gasketed connection ...

A: 3"B: 4"C: 7" Z-Flex Stainless Steel Increaser, 3" to 4" Used to upsize a vent system. Features • Vent material: AL29-4C stainless ste...

A: 3"B: 5"C: 8.15" Z-Flex Stainless Steel Increaser, 3" to 5" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 4"B: 5"C: 7" Z-Flex Stainless Steel 4" to 5" Pipe Diameter Increaser (not eccentric) Used to upsize a vent system. Recommended for us...

A: 4"B: 6"C: 8.15" Z-Flex Stainless Steel Increaser, 4" to 6" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 4"B: 8"C: 10.3" Z-Flex Stainless Steel Increaser, 4" to 8" (not eccentric) Used to upsize a vent system. Features • Vent material: AL...

A: 5"B: 6"C: 7" Z-Flex Stainless Steel Increaser, 5" to 6" Used to upsize a vent system. This part is not the eccentric (longer length) ...

A: 6"B: 7"C: 7" Z-Flex Stainless Steel Increaser, 6" to 7" (not eccentric) Used to upsize a vent system. Features • Vent material: AL29-...

Flat flashing provides weather protection at the spot where the vent penetrates your chimney or roof. Fits flat or slightly sloped (up to 5°) roofs...

Z-Vent Tee Cap with Drain A tee cap with drain is needed at the bottom of a vertical vent stack. A high temperature silicone tube is available sep...

Stainless Steel Wall Thimble, Standard (not Wide) WidthOn this page, choose from 3" to 24" diameter pipe sizes The 3" and 4" diameter versions of ...

NovaFlex Z-Flex Single-wall Z-Vent Pipe Z-Flex is the leading manufacturer of specialty venting systems for furnaces, boilers, tankless water heate...

The 3" or 4" Z-Flex vertical single-wall vent kit is designed for use with through-roof installations of indoor water heaters. Made of durable AL-2...